Light after shave with Liponate OP-26 No. 1596

5-Jul-2013

Light, fast absorbing formula using the conditioning effort of Liponate® OP-26 which leaves the skin looking smooth and refreshed...


DESCRIPTION:

Light, fast absorbing formula using the conditioning effort of Liponate® OP-26 which leaves the skin looking smooth and refreshed. Hylasome® EG10 improves skin moisturization.

FORMULATION:

SEQUENCEPERCENTINGREDIENTINCI NAME
181.91Deionized WaterWater
10.10Disodium EDTA (119)Disodium EDTA
10.15Carbopol Ultrez 20 (9)Acrylates/C10-30 Alkyl Acrylate Crosspolymer
12.50Liponic® EG-1(1)Glycereth-26
12.50Glycerin 96% (119)Glycerin
23.50Lipomulse® Luxe (1)Cetearyl Alcohol (and) Glyceryl Stearate (and) PEG-40 Stearate (and) Ceteareth-20
22.50Liponate® OP-26 (1)PPG-26 Oleate
24.50Liponate® NEB (1)C12-15 Alkyl Benzoate
30.34Sodium Hydroxide 18% Sol. (119)Sodium Hydroxide
40.50Lipo® Bisabolol (1)Bisabolol
51.50Hylasome® EG-10(1)Sodium Hyaluronate Crosspolymer
6Qs/100.00%PreservativePreservative

(1) Lipo Chemicals, Inc.
(9) Lubrizol
(119) Ruger

PROCEDURE:

1. Mix water, disodium EDTA with medium speed propeller stirring and start heating.
2. Add Carbopol Ultrez 20 to main vessel, continue mixing and heating.
3. Add remain Sequence #1 ingredients to main vessel, continue mixing and heating to 75-80°C.
4. In separate vessel combine Sequence #2 ingredients and start heating to 75-80°C.
5. Combine Sequence #2 into main vessel when temperature reaches 75-80°C.
6. Mix with medium speed propeller stirring, start cooling.
7. Add Sequence #3 to main vessel, batch will thicken slightly, continue mixing and cooling.
8. When temperature reaches 50°C add Sequence #4 and Sequence #5 to main vessel while mixing, continue cooling.
9. Stop mixing when batch reaches 32°C.

SPECIFICATIONS:

pH: 6.90 ± 0.2
Viscosity: TF at 1.5 rpm (Helipath:ON) = 85,300 cps ± 10%
Stability: 30 days at 50°C

You may also like